上機前 Application Before Installation

-------------------------------------------------------------------------------

★ 檢查包裝是否完整。

★ 檢查包頭所標的品號、規格、平米克重等是否與訂貨內容相同。

★ 打開包裝檢查毛毯外觀質量及規格尺寸。

★ Inspect the package integrity.

★ Verify the Model No, specification, GSM on the package in consistency with order.

★ Unpack and inspect the appearance and dimension.

上機安裝 Installation

-------------------------------------------------------------------------------

★ 清潔造紙機有關部位。

★ 看清造紙毛毯的正反面及運行方向。

★ 防止油污沾污及硬物損傷毛毯。

★ 杜絕硬拉強扯。

★ Clean paper machine.

★ Verify front and back side and the run direction.

★ Avoid grease staining and damage.

★ Do not draw strongly.

放漿 Paper Making

-------------------------------------------------------------------------------

★ 做好放漿前的準備工作。

★ 放漿后及時調整毛毯的張力至正常狀態。

★ 保證壓榨部兩邊線壓力ー致并及時調整線壓力的大小。

★ 保證真空系統及洗滌系統的正常運行。

★ 觀察毛毯的標準線運行狀態和毛毯走形狀態 , 發現問題及時調整。

★ Complete all preparation work before releasing pulp.

★ Adjust the tension of the felt after releasing pulp.

★ Ensure the same linear pressure on both sides of the feltand adjust accordingly.

★ Ensure the normal running on vacuum system andwashing system.

★ Inspect the running situation for shifting and regulateaccordingly.

★ Prevent any pulp piece or broken paper coming into thepress area or felt.

日常維護 Maintenance

-------------------------------------------------------------------------------

★ 防止毛毯打折、不均勻磨損、不均勻洗滌、意外破損。

★ 防止壓區內進入紙團、漿團等異物。

★ 正確使用高壓水、扇形水、真空洗滌箱。

★ 隨時保持標準線的平直。

★ 加強毛毯的連續洗滌及定期洗滌，合理使用化學洗滌劑。

★ 停機時間長時將毛毯洗滌干浄并放松。

★ 不明事項請及時與制造商聯系。

★ Prevent the felt from folding, uneven wearing, washin and breakage.

★ Prevent spitball and pulp corps entering into the presssection.

★ Correctly use the high pressure water, sector water and vacuum washing box.

★ Keep the standard line straight and parallel.

★ Wash the felt frequently and use proper chemical wash.

★ Wash completely and relax during downtime.

★ Enhance the life performance through washing.

★ Any question, please contact with the manufacturer.

造紙毛毯空運轉 Running without stock

-------------------------------------------------------------------------------

★ 展平所有部位毛毯

★ 清水充分濕潤毛毯

★ 適當張緊毛毯

★ 檢查所有輥子、壓榨進口及毛毯的狀態。

★ 施加一定壓力。

★ 紙機爬行。

★ 再張緊毛毯。

★ 施壓至正常壓力。

★ 清洗、洗滌劑或5%濃度的熱堿水軟化毛毯。

★ 開啟低壓蒸汽及真空系統。

★ 根據標準線調整毛毯運行狀態

★ 足夠的空運轉時間有利于提高毛毯的初期適應性和延長毛毯的壽命。

★ Align the felt.

★ Wet the felt with clean water.

★ Put proper tension on the felt.

★ Inspect all rolls, press entrance and felt situation.

★ Increase nip pressure.

★ Paper machine creep speed .

★ Further increase tension.

★ Set at normal pressure.

★ Add clean water，detergent or 5% hot caustic to soften the felt.

★ Inject lower pressure steam and vacuum system.

★ Adjust the felt surface.

★ Sufficient run time on bare machine will improve the stability and durability of felt.